[ESP-ENG]Desafió de reciclaje creativo # 14. Un lindo porta rollo || Creative Recycling Challenge # 14. A cute roll holder

Hola amigos Hivers

Una vez mas les deseo lo mejor y bendiciones en todo lo que emprenda. En el dia de hoy me uno a esta prestigiosa e importante desafio, radicando la mayor importancia de reciclar, reutilizar, reducir, los materiales de provecho y sacarle un mayor uso.

Hello Hivers friends

Once again I wish you all the best and blessings in all that you undertake. Today I join this prestigious and important challenge, rooting the greater importance of recycling, reusing, reducing, repurposing materials and getting more use out of them.

Desafió de reciclaje creativo # 14. Un lindo porta rollo .png

iales.gif

Cuando reciclamos, le damos un buen uso a todos los materiales que conocemos que podemos reutilizar como son: cartón, botellas plásticas, bolsas plásticas, tubo de papel higiénico, botella de vidrio. C. D, y muchos mas, estamos ayudando , aportado nuestra contribución al medio ambiente, a reducir el impacto ambiental, en cuanto a la contaminación y descomposición de estos materiales.

En cada lugar hay personas que aman reciclar y valorar la importancia de reciclar. Algunos de los materiales a reciclar tardas años para descomponerse, causando daños a los animales, al ambiente, a la naturaleza, es decir, si arrogamos papel, plástico, botella al río , lago, estamos causando daños al agua y a los animales y por ende a nosotros los seres humanos.

En cada país, hay personas encargadas de cuidado, preservación, conservación del medio ambiente, dictando charlas, para concientizar a todos a cuidado del medio ambiente y de reciclar como ayuda. Esta labor es muy bella.

Para participar en este concurso de creaciones con reciclaje, participare con un hermoso porta rollo, fácil y practico de hacer. Utilice como material principal botella plástica.

When we recycle, we give a good use to all the materials we know that we can reuse such as: cardboard, plastic bottles, plastic bags, toilet paper tube, glass bottle. C. D, and many more, we are helping, making our contribution to the environment, to reduce the environmental impact, in terms of pollution and decomposition of these materials.

In every place there are people who love to recycle and value the importance of recycling. Some of the materials to be recycled take years to decompose, causing damage to animals, the environment and nature, that is, if we throw paper, plastic, bottles in the river, lake, we are causing damage to water and animals and therefore to us humans.

In each country, there are people in charge of care, preservation, conservation of the environment, giving talks, to make everyone aware of the care of the environment and recycling as a help. This work is very beautiful.

To participate in this contest of creations with recycling, I will participate with a beautiful roll holder, easy and practical to make. Use as main material plastic bottle.

image.png

iales.gif

Para su elaboración necesitamos los siguientes materiales:

  • Una botella plástica de un litro y medio.
  • Una botella plástica de dos litros.
  • Tijera.
  • Cutter.
  • Pistola de silicón y silicón delgado.
  • Cinta decorativa.
  • Pedazo de tela de jean.

For its elaboration we need the following materials:** ** A one and a half liter plastic bottle.

  • A one and a half liter plastic bottle.
  • A two-liter plastic bottle.
  • Scissors.
  • Cutter.
  • Silicone gun and thin silicone.
  • Decorative tape.
  • Piece of denim.

Paso 1.png

iales.gif

Paso 1

Primero empezamos a cortar con ayuda del cutter y tijera la parte del centro de la botella plástica(un litro y medio), con una medida de 9,5 centímetros. A la botella plástica de dos litros la cortamos a una medida de 11 centímetros. Midiendo con el papel higiénico para que entre.

Step 1

First we start cutting with the help of the cutter and scissors the center part of the plastic bottle (a liter and a half), with a measure of 9.5 centimeters. We cut the two-liter plastic bottle to a measure of 11 centimeters. Measuring with the toilet paper to fit.

Paso 1 (1).png

iales.gif

Paso 2

Luego empezamos a medir y abrir en la botella plástica de dos litros, una abertura para el papel higiénico de 9,5 centímetros. Y lo recortamos poco a poco. Luego procedemos a forrar con la tela jean con la pistola de silicón, cuidando de colocar silicón a la tela jean primero para luego pegar en la parte plástica. Abrimos la parte de la abertura con cuidado y metemos parte de la tela jean hacia adentro.
Después con la pistola de silicón vamos colocando la cinta decorativa alrededor.

Step 2

Then we start to measure and open in the two-liter plastic bottle, an opening for the toilet paper of 9.5 centimeters. And we cut it out little by little. Then we proceed to cover it with the jean fabric with the silicone gun, taking care to put silicone on the jean fabric first and then glue it on the plastic part. We open the opening carefully and put part of the jean fabric inside.

Then with the silicone gun we place the decorative ribbon around it.

Paso 1 (2).png

iales.gif

Paso 3

Luego con la parte de la botella plástica de un litro y medio, vamos a colocar el guindadero, con la cinta azul delgada. abriendo dos agujeros a los lados con ayuda de la tijera, y colocamos la cinta, haciendo un nudo por la parte de adentro.

Procedemos a decorar con la cinta decorativa a su alrededor.

Step 3

Then with the part of the one and a half liter plastic bottle, we are going to place the guindadero, with the thin blue ribbon. opening two holes on the sides with the help of the scissors, and we place the ribbon, making a knot on the inside.

We proceed to decorate with the decorative ribbon around it.

Paso 1 (3).png

iales.gif

Paso 4

Una vez ya decorada, procedemos a unir las dos parte, midiendo el centro, que quede derecha. Con ayuda de un retazo de tela jean en el medio se pego y se pegaron las dos partes con silicón. Haciendo presión un poco. Se le colocaron unos detalles para que tenga una bonita vista.

Step 4

Once decorated, we proceed to join the two parts, measuring the center, so that it is straight. With the help of a piece of jean fabric in the middle, glue and stick the two parts with silicone. Pressing a little. A few details were placed to give it a nice view.

Paso 1 (4).png

Paso 1 (5).png

iales.gif

Resultado final

Y aquí esta el porta rollo listo para usar. Con los materiales de provecho podemos realizar muchas cosas. Así se les invita reciclar y aprender a dar un nuevo uso.

Final result

And here is the roll holder ready to use. With scrap materials we can make many things. This way you are invited to recycle and learn how to give a new use.


Invito a participar a @mariana30, @omaira74 a unirse a este gran desafio significativo

I invite @mariana30, @omaira74 to join this great and meaningful challenge

Todas las fotos son de mi autoría y edición de canva.

All photos are of my authorship and canva editing.


Vota comenta comparte.gif

H2
H3
H4
3 columns
2 columns
1 column
2 Comments
Ecency