Recycled Gift Bag [Eng-Esp] Bolsa De Regalo Con Material Reciclado

IMG_20210602_103418.jpg

Banner hive duneskya.png

English Version

Recycled Gift Bag

Good afternoon Hive friends I hope you are well. Today I want to share with you a tutorial of, how to make a gift bag with recycled material.

The materials to use are as follows:

  • 2 letter size recycled paper
  • White glue or glue stick
  • 1 rectangle in cardboard 9cm X 4 CM
  • 1 ruler to measure
  • Pencil
  • Flowers to decorate

Step 1:

As you can see the steps in order from left to right, as shown in the image below. A) We take the sheet with the marked side up B) We mark 2 CM of margin at one end and the width of the sheet. C) Then we fold that 2 CM tab inwards.

InShot_20210602_140913140.jpg

Step 2:

A) The edge of the other end of the sheet we bring it up to the 2 cm tab we already made. B) Bring the edge of the sheet to the line we marked for the 2 CM C) Lower the tab to glue it.

InShot_20210602_141105137.jpg

Step 3:

Apply the paste and close the tab.

InShot_20210602_141301978.jpg

Step 4:

On the other side where the tab is not. We take out a margin of 2 cm and fold it to both sides so that it is somewhat loose. Do the same on the other side of the tab.

IMG_20210602_095814.jpg

Step 5:

We are going to be like this and the line that is marked all over the center (The one with the number 2 ).

IMG_20210602_100117.jpg

Step 6:

Fold it inward so that it looks like this.

IMG_20210602_100153.jpg

Step 7:

IMG_20210602_100433.jpg

We mark 4 CM to fold to the 2 sides. (If you want the bag less long you can add more cm).

IMG_20210602_100505.jpg

IMG_20210602_100531.jpg

Step 8:

Fold the corners of the sheet so that it is parallel to the line we marked for the 4 CM, press and make the fold to both sides. The same step is repeated with the other corner.

InShot_20210602_141445739.jpg

Step 9:

The bottom part where we mark the 4 CM we fold it as you see in the image giving the fold to each one to match and to be able to glue and close.

InShot_20210602_183359132.jpg

Step 10:

You bring the rectangle to the bottom of the sheet.

IMG_20210602_101752.jpg

Step 11:

Cut out 4 strips of 8 CM x 3 cm.
We take 2 strips and roll them up to make the handles of the bag.

IMG_20210602_101934.jpg

Our gift bag with recycled material is ready.

IMG_20210602_103418.jpg

IMG_20210602_102933.jpg

The flowers were made with recycled material (egg carton) one of my post explains how to make them.

IMG_20210602_102925.jpg

IMG_20210602_102940.jpg

Thanks for reading me!

Translated with www.DeepL.com/Translator (free version)

Banner hive duneskya.png

Versión Español

Bolsa De Regalo Con Material Reciclado

Buenas tardes amigos de Hive espero que estén bien. Hoy quiero compartir con ustedes un tutorial de, cómo hacer una bolsa de regalo con material reciclado.

Los materiales a usar son los siguientes:

  • 2 hoja de reciclaje tamaño carta
  • Pega blanca o en barra
  • 1 rectángulo en cartulina 9cm X 4 CM
  • 1 regla para medir
  • Lápiz
  • Flores para decorar

Paso 1:

Como pueden ver los pasos en orden de izquierda a derecha, como se muestra en la imagen de abajo. A) Tomamos la hoja con lo marcado hacia arriba B) Marcamos 2 CM de margen en un extremo y lo ancho de la hoja. C) Luego doblamos esa pestañita de 2 CM hacia dentro.

InShot_20210602_140913140.jpg

Paso 2:

A) La orilla del otro extremo de la hoja la llevamos hasta la pestaña de 2 cm que ya hicimos. B) Llevamos la orilla de la hoja a la línea que marcamos para los 2 CM C) Bajamos la pestaña para echarle la pega.

InShot_20210602_141105137.jpg

Paso 3:

Aplicamos la pega y cerramos la pestaña.

InShot_20210602_141301978.jpg

Paso 4:

Del otro lado donde no está la pestaña. Sacamos un margen de 2 cm y lo doblamos hacia los dos lados de manera que quedé algo floja. Lo mismo hacemos del otro lado de la pestaña.

IMG_20210602_095814.jpg

Paso 5:

Nos va a quedar así y la línea que se marca en todo el centro (La que tiene el número 2 )

IMG_20210602_100117.jpg

Paso 6:

Se dobla hacia adentro para que nos quedé así.

IMG_20210602_100153.jpg

Paso 7:

IMG_20210602_100433.jpg

Marcamos 4 CM para doblar hacia los 2 lados. (Si quiere la bolsa menos larga puede agregarle más cm)

IMG_20210602_100505.jpg

IMG_20210602_100531.jpg

Paso 8:

Las esquinas de la hoja la doblamos que quedé paralela con la raya que marcamos para los 4 CM, presionamos y le hacemos el doblez hacia los dos lados. El mismo paso se repite con la otra esquina.

InShot_20210602_141445739.jpg

Paso 9:

La parte de abajo donde marcamos los 4 CM la doblamos como ven en la imagen dándole el doblez a cada uno para que coincidan y poder pegar y cerrar.

InShot_20210602_183359132.jpg

Paso 10:

El rectángulo lo lleváis al fondo de la hoja.

IMG_20210602_101752.jpg

Paso 11:

Recortamos 4 tiras de 8 CM x 3 cm.
Tomamos 2 tiras y las enrollamos para hacer las asas de la bolsa.

IMG_20210602_101934.jpg

Lista nuestra bolsa de regalos con material reciclado.

IMG_20210602_103418.jpg

IMG_20210602_102933.jpg

Las flores fueron hechas con material reciclado (cartón de huevos) uno de mis post explica cómo hacerlas.

IMG_20210602_102925.jpg

IMG_20210602_102940.jpg

Gracias por leerme.!

H2
H3
H4
3 columns
2 columns
1 column
Join the conversation now
Ecency