Simple and beautiful - DIY ( GOWN)

IMG_20211002_133615_812.jpg

Hello guys, I made this today and I'm bringing it here for us to see.

The steps;

  • get your measurements ready.

  • fold your material into two

  • from the top of the material place your tape and measure downwards.

  • the top of the material will serve as half-length point.

  • mine is 15 inches. Took 9inches from there to serve as hip point.

  • at the top of the material Mark your waist measurements/4

  • at the hip point mark your hip measurements/4

  • trace out n cut.

IMG_20211001_100444_595.jpg
IMG_20211001_093654_227.jpg

  • place to cut out material on another folded parts of the clothes. Include 2 inches allowance for zip.

For the upper part.

  • fold the material into two, start from 4inches n mark down 8inches n 11inches

  • at the point of the 4inches mark 3inches inwards. At the 8inches point mark 4inches inwards,at the 11inches point mark 3.

Join up
IMG_20211001_094226_025.jpg

IMG_20211001_095341_179.jpg

  • cut the sides, I will show you how to do that in my next work.

  • cut out the back, refer to my previous works for this.

  • join all up n line it.

  • fix any hand of your choice

Your dress is ready 😊

IMG_20211002_090106_540.jpg

IMG_20211002_133603_457.jpg

H2
H3
H4
3 columns
2 columns
1 column
7 Comments