Disturbing facts on the Moderna vaccine, related to metal particulate!

Medical wisdom seems to include that if you have a temperature, you must get a shot...NO exceptions!

IMG_20210917_230159711.jpg
So one demands the other! But there are serious questions about the effecacy and safety of this experimental vaccine! Which raises the question, when did the government recieve the power to do whatever they damn well please, with our most personal possession...our very bodies?

As everyone know by now, two million doses of this vaccine have been quarantined in Japan, for metal contamination. They had three deaths in young males after they received the shot.

Moderna admitted that their Spanish production plant had problems, that were the source of this metal, and it is 300 series stainless steel.

They then said that this type of steel is used routinely for implantable devices, which is half true. Implantable devices do include many made of 300 series stainless steel, but those devices are highly polished to minimize chromium release into the patient by reducing the contact area. Rough particles are totally the opposite as rough surfaces maximize contact areas and cause high chromium absorption. They know this, but they insist there is zero danger; so their vaccine gravy train stays safe, and rolling.

Extreme production schedules leave no time for preventative maintenance; so this combined with maximum production rates forces equipment beyond design limits, and it begins to break down. This is where the stainless steel particles come from!

I have designed and manufactured medical equipment from this stainless steel, so I can tell you that it is normally non magnetic. It does become slightly magnetic when work hardened. Bearing surfaces, when failing; would work harden quickly. This is, by their own admission; the source of these contaminants, obviously missed by inline filtering. Since 300 series stainless steel is only mildly magnetic, even after work hardening; this next portion is especially disturbing!

Squirrelbait was pushed off of YouTube for accuracy and making Conservative posts. She is still very accurate, but can only post on bitchute; due to this censorship. She ran a test on a vaccinated arm that you need to watch!

https://www.bitchute.com/channel/PMF56Is7U2VQ/
The quantity of stainless steel needed to make this local area magnetic is stunning! The only good part is that it was inter-muscular, and these particles are not traveling; or they could do real immediate damage, like a clot or embolism can. This is likely what killed those young Men in Japan...a stainless steel "embolism"; from this manufacturing debris that was sadly, injected into a vein!

In over 4 decades in medical manufacturing, I have never seen such slipshod medical device production, one that appears to have Zero quality control! I have seen better production lines for "veterinary use" devices.

Lastly, so you don't think I am picking on a single manufacturer, here's one about Pfizer:
https://www.rallyingpatriots.com/yikes-contaminated-pfizer-vaccines-reported-in-several-cities/
Apparently their vaccine has contamination problems too! They say that small white or pink particles float freely on their offering. Too soon to tell what it might be, but I have never seen stainless steel turn pink. I have seen some stainless steel that was extensively oxidized, in white. Such oxidation would make the chromium biologically available, and increase the risk significantly!

It looks like the safest path is to refuse the vaccine, and use good clinical practice to avoid infection. BTW, a mask designed to stop 95% of a 1 micron bacteria; will make no measurable difference in infection rates in a 0.1 micron virus!

As I posted recently, using CDC numbers; the vaccine itself, is not much safer than the Chronavirus itself! If you allow that the CDC is known to doctor it's numbers to make their programs look better. This only proves that they are politicians, and not scientists, SMH!

H2
H3
H4
3 columns
2 columns
1 column
2 Comments
Ecency